ABS adhesive for stainless steel, ABS adhesive for iron, ABS adhesive for metal, Shang Hao Jia 801 adhesive for stainless steel

Shang Hao Jia 803 one-component metal adhesive, silicone adhesive for magnets, magnet bonding adhesive applicable bonding materials: suitable for most materials, metal bonding to soft TPR, plastic bonding to metal, rubber bonding to metal, data cable production connector bonding to PVC, metal bonding to POM, acrylic gem bonding to ABS, ABS bonding to ABS, iron bonding to ABS, alumina bonding to ABS, silicone bonding to magnets, PVC bonding to metal, rubber bonding to ceramics, etc., with excellent bonding effect on electroplated metal materials.

Product features: fast curing speed, high bonding strength, low odor, no whitening, good temperature resistance

Friendly reminder: the lower the temperature, the slower the adhesive setting time

Usage method:

1. Surface treatment: Use a dry cloth or sandpaper to remove dust, oil, rust, etc. from the surface, then wipe with a diluent to clean the bonding surface.

2. Adhesive application:

(1) Unscrew the front cap to use. If there is adhesive at the bottle mouth, first wipe it clean with a cloth, then attach the needle or PE dropper for use. Pay attention to controlling the adhesive flow to ensure bonding effectiveness.

(2) Apply a small drop of adhesive to the surface to be bonded, then proceed with bonding and hold until hardened. Hardening time varies from a few seconds, generally about 5-10 seconds, reaching practical strength in 30 minutes and high strength after 24 hours.

(3) After use, clean the bottle mouth and tighten the cap to prevent solidification before next use.

(4) Store the adhesive in a cool, dry place after use.