Silicone adhesive for stainless steel is widely used in industry. An adhesive with high bonding strength, easy operation, efficiency, and environmental friendliness can enhance production efficiency and reduce costs for factories. Shang Hao Jia 801 adhesive for stainless steel is a fast-drying silicone adhesive specifically designed for stainless steel.

I. Product Introduction:

Shang Hao Jia 801 is a single-component, room-temperature curing, low-whitening nylon metal adhesive. It is suitable for bonding silicone rubber with hardware (such as stainless steel, magnets, copper, zinc alloy, nickel-plated metals, etc.), plastic nylon to metal, and metal-to-metal self-adhesion or mutual adhesion. It is particularly effective for bonding stainless steel hardware, plastic with hardware, stainless steel, iron, magnets, nylon, and other materials, offering convenient operation and excellent bonding strength.

II. Characteristics

III. Usage Instructions:

1. Clean the surface of the bonding parts from dirt, rust, oil, mold release agents, etc. Use a clean cloth for cleaning.

2. Apply a primer (adhesion promoter) to the silicone rubber or thermoplastic elastomer, PP, or PA surface. Allow it to sit for 1-2 minutes until the primer is completely dry. Apply the adhesive to the bonding surface, then press the other part firmly for a few seconds.

3. Initial fixation typically occurs within about 5 minutes. Do not separate or move the bonded parts during this time, as it may affect bonding strength.

4. The amount of adhesive should be sufficient to form a thin film after bonding. Too little adhesive may result in insufficient strength, while too much may slow curing and cause significant whitening.