16Channels Optical Switch 1x16 for Telecommunication Transmission System
Contact Info
- Add:#819, Zhanrun Bldg, Yunfeng Rd, Longhua Dist., Shenzhen, Guangdong, Zip: 518109
- Contact: Ms. Huang
- Tel:+86 18682020027
- Email:hbinbin@htfuture.com
Other Products
Optical Switch 1x16 ports Telecommunication Transmission System
1×16Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Features:
- ·More Than 16Channels
- ·Low Loss and High Reliability
- ·Parallel Interface (TTL)
- ·Modularized Design
- ·Epoxy-free on Optical Path
Applications:
- Ring Network
- Remote Monitoring in Optical Network
- Testing of Fiber, Optical Component
Optical Specifications
|
Parameters |
Unit |
HT-OSW1×16 |
|
|
Insertion Loss |
dB |
≤1.0，Type: 0.8 |
|
|
Wavelength Range |
nm |
MM:850±40 / 1300±40,1550 |
SM:1260 ~ 1650 |
|
Test Wavelength |
nm |
SM:850 / 1300,1550 |
SM:1310 / 1550 |
|
Return Loss |
dB |
MM ≥ 30 SM ≥ 50 |
|
|
Crosstalk |
dB |
≥ 70 |
|
|
PDL |
dB |
≤ 0.05 |
|
|
WDL |
dB |
≤ 0.25 |
|
|
TDL |
dB |
≤ 0.25 |
|
|
ER (PM swtich) |
dB |
≥ 16 (PoIarization Maintaining switch) |
|
|
Repeatability |
dB |
≤ ±0.05 |
|
|
Durability |
Cycles |
≥ 10 Million |
|
|
Switching Time |
ms |
≤ 10(Sequence switch time of adjacent channel) |
|
|
Optical Power |
mW |
≤500 |
|
|
Operating Temperature |
℃ |
-5~ +70 |
|
|
Storage Temperature |
℃ |
-40 ~ +85 |
|
|
Relative Humidity |
% |
5 ~ 95 |
|
|
Dimension |
mm |
135×60×32 |
|
Pin Configurations:
DB-9 maleconnector
|
Pin No. |
Signal Name |
I / O |
Description |
|
1 |
D0 |
Input |
TTL, Channel selection bit 0 |
|
2 |
D1 |
Input |
TTL, Channel selection bit 1 |
|
3 |
D2 |
Input |
TTL, Channel selection bit 2 |
|
4 |
D3 |
Input |
TTL, Channel selection bit 3 |
|
5 |
/RESET |
Input |
TTL, Low level reset to channel 0. High level means channel selection bits are effective. |
|
6 |
/READY |
Output |
TTL, Ready (High=Not ready, Low=Ready) |
|
7 |
ERROR |
Output |
TTL, Error (High=Error, Low=No error) |
|
8 |
GND |
Input |
Ground |
|
9 |
+5VDC |
Input |
5.0±5% VDC Power Supply (max 800mA) |
| Industry Category | Electrical & Electronics/Antennas/Communication Antenna |
|---|---|
| Product Category | |
| Brand: | HTF |
| Spec: | 16Channels Optical Switch 1x16 for Telecommunication Transmission System |
| Stock: | |
| Origin: | China / Guangdong / Shenshi |
