Fixed NMP Gas Concentration Analyzer
Other Products
N-Methylpyrrolidone NMP Gas Alarm
Product Overview
The N-Methylpyrrolidone NMP gas alarm developed and produced by Besian adopts a diffusion method to convert the gas concentration signal at the monitoring point into an electrical signal in real time. This signal is amplified and then processed by the CPU via AD sampling, temperature compensation, and intelligent calculation. If the measured value exceeds the set alarm concentration, an alarm signal is issued.
The BSA/QT-BJ series intelligent gas alarm features advanced technology, excellent performance, high stability, compatibility with multiple signal outputs, and convenient installation and maintenance, greatly meeting the requirements for high reliability of equipment in industrial safety monitoring.
Product Features
*On-site LCD display of gas concentration;
*High-precision, long-life imported sensors;
*Meets customer requirements for any range between 1-99999 and all gas detection needs
*Alarm point adjustment, zero adjustment, and target point calibration can be performed on the transmitter without opening the cover via a controller or remote control;
*Used for the detection of dozens of gases and can display the gas name;
*Gas unit names: ppm, LEL%, VOL%, mg/m3;
*Upper and lower limit alarm points can be set arbitrarily within the full range
*Two sets of normally open passive contact outputs for controlling AC contactors of fans or solenoid valves; optional audible and visual alarm;
*Exquisite power supply design, superb lightning protection design, and pure SMT component patch process ensure stable product performance;
*Ingenious structural design makes installation extremely simple;
Design Standards
GB50493-2009 "Design Specification for Combustible Gas and Toxic Gas Detection and Alarm in Petrochemical Industry"
GB 12358-2006 "General Technical Requirements for Gas Detection and Alarm Instruments in Workplace Atmosphere"
Executive Standards
GB3836.1-2010 "Electrical Equipment for Explosive Gas Atmospheres - Part 1: General Requirements"
GB3836.2-2010 "Electrical Equipment for Explosive Gas Atmospheres - Part 2: Flameproof Enclosure 'd'"
Product Technical Parameters
Product Name | N-Methylpyrrolidone NMP Gas Leakage Detector Alarm | Product Model | BSA/QT-BJ(NMP) |
Detected Gas | N-Methylpyrrolidone NMP | Detection Principle | Photoionization PID/Catalytic Combustion |
Detection Range | 0-2ppm, 0-20ppm, 0-200ppm, 0-2000ppm, 0-10000ppm, 0-100%LEL, etc. optional | ||
Resolution | 0.001ppm, 0.005ppm, 0.01ppm, 0.1ppm | Detection Method | Diffusion type, Pump suction type optional |
Display Mode | LCD display | ||
Output Signal | User can define according to actual requirements: 1.Two-wire 4-20mA current signal output (three-wire optional) 2.RS-485 digital signal output, can store data on computer with RS232 adapter card (optional) 3.2 groups of relay outputs; passive contact capacity 220VAC 3A, 24VDC 3A (optional) 4.Alarm signal output: on-site audible and visual alarm, alarm sound: <90 decibels (optional) | ||
Detection Accuracy | ≤±2% (FS) | Repeatability | ≤±1% |
Zero Drift | ≤±1% (FS/year) | Alarm Mode | Sound, Light Alarm |
Response Time | <20S | Recovery Time | <20S |
Explosion-proof Type | Intrinsically Safe | Explosion-proof Mark | Ex ibdIICT6 |
Protection Rating | IP65 | Display Unit | PPM, %LEL, %VOL arbitrarily settable |
Major Application Industries
N-Methylpyrrolidone is widely used in industries such as lithium batteries, pharmaceuticals, pesticides, pigments, cleaning agents, and insulation materials
| Industry Category | Instruments & Meters/Analytical Instruments/Gas Analyzers |
|---|---|
| Product Category | |
| Brand: | BSA/QT-BJ（NMP） |
| Spec: | BSA/QT-BJ |
| Manufacturer: | 深圳市貝斯安智能科技有限公司 |
| Origin: | 114403 |
