HBAR armored tape is primarily used for restoring the steel armor outside the waterproof layer of cable intermediate joints, providing protection and structural support for the joint.

Product Information
Specification: 100mm×4.6m
Color: Black
Appearance: Packaged in aluminum foil bags
Operating Conditions: -40 to 150°C

Product Features
1. Utilizes moisture-curing adhesive material and high sunlight-resistant mesh fabric as the base substrate. Easy to use—simply wrap it directly around cable accessories or cables to form a high-strength outer protective layer, enhancing mechanical protection for joints and cables.
2. Features rapid water-activated curing, simple operation, and a wide range of applications.
3. After curing, the formed structure exhibits high bending and tensile strength, is odorless, and resistant to water and corrosion.
4. The cured material can withstand temperatures up to 150°C and internal pressures as high as 10 kg.

Application Range
1. Used in the power cable industry for 10kV and 35kV single-core or three-core cold-shrink cable intermediate joint connections, as well as in cold-shrink tubing technology for non-pressurized communication cable splicing, providing ideal mechanical protection for cable joints.
2. Reinforces the outer protective layer of cables and strengthens the outer protective layers of cable joints and terminations.
3. Provides external protection for welding consumables such as electrodes, welding guns, and cables in automotive welding equipment.
4. Used for quick leak-proof repairs, especially for pipeline repairs.
5. When used in conjunction with leak repair materials like plastic steel putty, it enhances the pressure resistance of the repaired pipeline.

Usage Instructions
Put on gloves, tear open the packaging along the tear notch, pour water into the packaging bag, knead for a few seconds, then remove the wrapping tape and squeeze out excess water. Wrap the tape gradually at a 45-degree angle, overlapping by 1/3 and applying slight pressure to allow the tape to conform plastically to the surface. For areas with sudden increases or decreases in diameter, fold the tape back and wrap accordingly. Repeat the process to wrap 4-8 layers.

Curing Time Reference:

Note: Full curing requirements can be achieved within 24 hours.