HB1501 high-voltage insulating heat-shrink tape is primarily used for the insulation protection of power busbars and busways. It can also be used for repairing damaged outer sheaths of various cables, providing a simple, fast, and effective solution.

Product Information
Specification: 0.8mm (thickness) × 50mm (width) × 5m (length)
Color: Red, yellow, green, black
Appearance: Rolled
Operating Conditions: -40℃ to 90℃
Packaging Specification: 50 rolls/box

Product Features
1. Composite structure: The inner layer melts during heating while the outer layer shrinks, bonding the layers into one unit; resistant to outdoor aging and mold.
2. Excellent electrical insulation, good flame retardancy, and high mechanical strength.
3. Strong adhesion and sealing properties with cable outer sheaths and itself.
4. Quick installation: Simply wrap and heat-shrink for easy operation.

Applications
1. Anti-condensation, anti-pollution flashover, and anti-corrosion treatment for busbars in substation switchgear.
2. Insulation protection to prevent foreign object contact with live bare wires or other live conductors, avoid personal injury accidents, and prevent short-circuit faults caused by small animals.
3. Local repair of mechanical damage, burn marks, or solvent erosion on the outer sheaths of power, communication, signal, and mining cables.
4. Waterproof sealing treatment for the port of heat-shrink cable intermediate joint sleeves.
5. Composite insulation treatment for insufficient clearance between any live conductor and the ground or similar situations.

Usage Instructions
Press the shiny side of the tape tightly against the object to be wrapped. Overlap by half and wrap firmly, securing the end with an object (to prevent loosening). Use a flame to heat and shrink until the inner adhesive slightly emerges. Bond into a complete repair.