ZX-312 Oil and Rust Remover 2-in-1

Product Description:
Oil and Rust Remover: An acidic concentrated formulation composed of corrosion inhibitors, synergists, metal protectants, surfactants, and additives. It is primarily used for the rapid and uniform removal of oxide rust spots from metal workpieces without leaving marks, restoring the workpiece to a bright finish. Can be applied via immersion or spraying methods.
Product Technical Specifications:
Appearance: Yellow-green liquid. Processing Temperature (°C): Room temperature
pH Value: 2. Processing Method: Immersion, Spraying
Dilution Ratio: 1:3-5. Processing Time: 2-20 minutes
III. Usage Instructions:
1. This product does not require heating and is best used at room temperature. Dilute the concentrate with water at a ratio of 1:3-5 and apply via immersion, spraying, or other methods.
2. After oil and rust removal, workpieces should be thoroughly rinsed with flowing clean water before proceeding to the next process.
3. As continuous production consumes the solution, the concentration of the working liquid will gradually decrease. Timely replenishment of the oil and rust remover is necessary to maintain acidity within the specified range and ensure effective oil and rust removal.
4. Promptly remove oil and other contaminants floating on the liquid surface to prevent recontamination of cleaned workpieces.
IV. Product Features:
1. Oil and rust removal completed in one step. Water-based, non-polluting, non-flammable, non-explosive, non-volatile, and remains stable during long-term storage.
2. Application Scope: Suitable for small and medium-sized parts, large steel components, and products such as iron, steel, stainless steel, and castings for derusting, degreasing, and activation treatment before coating.
3. Contains corrosion inhibitors that do not corrode the metal substrate.
4. The 2-in-1 oil and rust remover can be reused. Regularly clean floating contaminants and sediment at the bottom of the tank.
V. Precautions:
1. This product is acidic. Avoid bare-hand contact during operation. Use chemical-resistant protective equipment, avoid contact with skin and eyes, and ensure adequate ventilation.
2. In case of skin contact, remove contaminated clothing and rinse thoroughly. If contact with eyes occurs, rinse with plenty of water for 15 minutes and seek medical attention.
VI. Packaging and Transportation:
Standard 25 kg packaging. Store in a cool, dry place. Shelf life: three years.