Domestic Shipping Suitable Pressure for Riveting Machine Sheet Metal Press Riveting Machine
The appropriate pressure adjustment for a riveting machine needs to be determined comprehensively based on the equipment type, material characteristics, and process requirements. The specific methods are as follows:
Conventional Pneumatic Riveting Machine
1. Air Source Preparation: Adjust the air pressure to 0.5-0.7 MPa. If using stainless steel rivets, an additional pressure of 0.1-0.2 MPa is required, and it should be monitored in real-time with a digital pressure gauge. If fluctuations exceed ±0.05 MPa, the machine must be stopped immediately.
2. Pressure Test: After adjustment, conduct a riveting test to ensure the rivets are correctly embedded and the connection is secure.
Hydraulic Riveting Machine
The pressure range is typically between 10-30 MPa and needs to be adjusted according to the rivet specifications and material thickness. For example:
Ordinary carbon steel material is recommended at 15-25 MPa
Stainless steel material requires 25-30 MPa

Domestic Shipping Suitable Pressure for Riveting Machine Sheet Metal Press Riveting Machine
General Adjustment Steps
1. Safe Operation: Disconnect the power before adjustment, wear protective equipment, and ensure the work area is safe.
2. Refer to the Manual: Consult the equipment manual and adjust according to the specific parameters of the model.
3. Regular Maintenance: Regularly check pressure parameters, oil levels, and system cleanliness to avoid equipment damage due to unstable pressure.
If the equipment model is special (such as hydraulic press TC152/TC155), strictly follow the pressure range specified in the user manual (e.g., TC152 is 430-1650 kgf/cm2, TC155 is 1400-5500 kgf/cm2) and adjust comprehensively in conjunction with stroke and time parameters.