Shanghai Land LD-P2000 Medical Intelligent Infusion Pump

Manager Wang   I77---OI86---7I88

I. Technical Parameters

1. Infusion set specifications: Various domestic ordinary infusion sets and dedicated silicone infusion sets

2. Flow rate selection: 1-1200ml/h (0.1-99.9ml/h incremented by 0.1ml/h; 100-1200ml/h incremented by 1ml/h)

3. Flow rate accuracy: ±5%

4. Drip rate range: 1 drop/min - 333 drops/min

5. Drip rate accuracy: Accuracy when monitoring range is 1-50 drops

6. Error compensation: Range 0-±30% (step size 2%)

7. Total infusion volume setting: 1-9999ML

8. Display range of infused volume: 1-9999ML

9. KVO flow rate: Infusion at 1ml/h

10. Bubble detection: Detectable bubble column length not less than 3mm

11. Drip sensor: Infrared photoelectric beam detection

12. Bubble removal: 800-999ml/h, removal volume 1-9ml

13. BOLUS speed: 600ml/h (adjustable between 500-800ml/h)

14. Noise: ≤36dB when operating at 25ml/h

15. Alarms: Occlusion, standby, bubble, door open, infusion completed, low battery, motor fault alarm

16. Type: Class I BF type

17. IP rating: IP*4 splash-proof equipment

18. Display: Large screen LCD

19. Dimensions: 130*102*200mm

20. Power: Less than 20VA

21. Weight: Approximately 1.3KG

II. LD-P2000 Infusion Pump Operating Conditions

1. Power supply: AC/DC dual-use AC: 100V-240V, 50/60Hz

Built-in lithium battery, voltage DC12V, fully charged in 4 hours, can power the pump operating at 25ml/h for 4 hours

2. Environmental conditions: Temperature -5℃ – +40℃

Relative humidity ≤20%-90%RH

3. Atmospheric pressure: 860hpa-1060hpa

4. Storage conditions: Temperature －40℃ – +55℃

III. Functions

Reserved nurse call function, audible and visual alarm function, adjustable standby time, alarm mute, bubble removal function, AC/DC and external DC power indication, rapid infusion control, conversion between flow rate and drip rate infusion modes, AC/DC switching alarm and indication, automatic clamping, infusion volume reset, KVO function, occlusion bolus dose release.