HH-LDEA Split Electromagnetic Flow Meter Produced by Jiangsu Henghe Flow Instrument Co., Ltd.

Product Overview: EMF Split Electromagnetic Flow Meter / Corrosion-Resistant Electromagnetic Flow Meter - Its measurement principle is based on Faraday's law of electromagnetic induction.

Split Electromagnetic Flow Meter consists of a sensor and a converter. The sensor is installed on the measurement pipeline, and the converter is installed within 30 meters or 100 meters of the sensor, connected by a signal cable. The main components of the sensor are: measurement tube, electrodes, excitation coil, iron core, and yoke housing.

The split electromagnetic flow meter is mainly used to measure the volumetric flow of conductive liquids and slurries in closed pipelines. Such as water, sewage, slurry, pulp, various acids, alkalis, salt solutions, food slurries, etc. It is widely used in petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking industries, as well as in environmental protection, municipal management, water conservancy construction, and other fields for measuring high-temperature, high-humidity, and hard-to-observe environments. 

 II. Product Features of Electromagnetic Flow Meter No moving parts in the pipeline, no flow obstruction parts, almost no additional pressure loss during measurement. Measurement results are related to flow velocity distribution, fluid pressure, temperature, density, viscosity, and other physical parameters. On-site range modification is available according to user needs. High-definition backlit LCD display, full Chinese menu operation, easy to use, simple operation, easy to learn and understand. Uses SMD components and surface mount technology (SMT), ensuring high circuit reliability. Equipped with a 16-bit embedded microprocessor, fast operation speed, high precision, programmable low-frequency rectangular wave excitation, improving the stability of flow measurement with low power consumption. Fully digital processing, strong anti-interference ability, reliable measurement, high precision, flow measurement range up to 150:1. Ultra-low EMI switching power supply, suitable for wide power voltage variations, good EMI resistance. Internal three totalizers can display forward cumulative flow and difference cumulative flow. Equipped with a non-volatile clock, recording 16 power-off times. (Optional) Digital communication signal outputs include RS485, RS232, Hart, and Modbus. (Optional) Self-check and self-diagnosis functions. Infrared handheld operator, 115kHz communication rate, remote non-contact operation of all converter functions. (Optional) Hourly total flow recording function, recording total flow per hour, suitable for time-based metering. (Optional) 

 III. Technical Parameters: Accuracy Class: ±0.5%, ±1% Lining Materials: Polyurethane, Neoprene, PTFE, etc. Electrode Materials: Stainless Steel 316L, Hastelloy, Titanium, Tantalum, Platinum-Iridium Alloy, etc. Connection Methods: Flange clamp, flange connection, etc. Medium Temperature: 0°C～70°C, 0°C～120°C, 0°C～180°C Nominal Pressure: 1.0MPa～32MPa Protection Level: IP65, IP68 Explosion-Proof Mark: ExdiiBT4 Operating Voltage: 220VAC, 24VDC

 Jiangsu Henghe Flow Instrument Co., Ltd. specializes in electromagnetic flow meters, vortex flow meters, turbine flow meters, metal tube float flow meters, swirl flow meters, mass flow meters, bar-type flow meters, Venturi tubes, orifice plates, nozzles, throttling devices. Welcome to purchase.