Product Overview

The sensor consists of an upper cover, housing, and lower cover. Inside the housing, there is a piezoelectric sheet and a circuit board. It can be fixed to a vertical pole with an outer diameter of 50mm. The sensor uses the impact measurement principle to calculate the weight of individual raindrops, thereby determining rainfall. During descent, raindrops are influenced by their weight and air resistance, reaching the ground at a constant velocity. According to P=mv, the impact measurement allows for the calculation of raindrop weight, leading to continuous rainfall measurement.

Features

◆ All-solid-state integrated design with an elegant appearance

◆ Utilizes impact measurement principle to calculate individual raindrop weight and determine rainfall

◆ No mechanical parts or exposed components; filters out interference signals from environmental factors such as leaves, dust, and insects

◆ High measurement accuracy, wide range, excellent stability, low power consumption, and strong resistance to external interference

◆ Minimal impact from weather changes; accurate rainfall duration monitoring down to the second

◆ Low maintenance requirements; raindrop contact surface features an arc design structure that prevents water accumulation

◆ Compact size, easy to carry, disassemble, and install

Technical Parameters

Measurement Parameters

Rainfall Measurement:

Rain Intensity Range: 0.3–10mm/min

Resolution: 0.01mm

Measurement Accuracy: ±4% (daily cumulative rainfall)

Update Interval: 5s

Cumulative Rainfall: Total rainfall since power-on

Current Rainfall: Data is retained after rain stops and resets to zero automatically at the start of the next rainfall

Current Rainfall Duration: Unit is 5s; e.g., a value of 12 indicates 60s of rainfall

Rainfall in the Past 1 Minute: Smoothed recursive value for the past minute

Rainfall in the Past 10 Minutes: Smoothed recursive value for the past 10 minutes

Peak Minute Rainfall in Current Session: Maximum minute rainfall during the current rainfall event

Optional Parameters

Air Temperature: -40–85°C | Resolution: 0.1°C | Measurement Accuracy: ±0.3°C

Relative Humidity: 0–100%RH | Resolution: 0.1%RH | Measurement Accuracy: ±3%RH

Atmospheric Pressure: 300–1100hPa | Resolution: 0.1hPa | Measurement Accuracy: ±0.4hPa

Other Parameters

Data Transmission Methods: RS485, 4G, LTE CAT-1; customizable LoRa, NB-IoT; supports positioning function

Power Supply Range: Mains power via 6–24VDC adapter or built-in lithium battery + solar power

Cable Length: 1.5 meters (standard)

Protection Rating: IP67

Applications

Suitable for meteorological environment monitoring, comprehensive hydrology and water resources monitoring stations, traffic road monitoring, agriculture, forestry, wind power generation, and other relevant departments for remote measurement of precipitation, rainfall intensity, and rainfall start/end times. Used in flood control, water supply scheduling, hydropower station reservoir management, and other hydrological automatic monitoring systems and field monitoring stations.

Installation Method

Installation on Top of a 50mm Vertical Pole

Compatible with vertical poles with an outer diameter of 50mm (wall thickness ≤3mm). A threaded M6 hole is drilled on the side of the pole, with the hole center 8mm from the top. Secure the sensor using an M6*15 cross round-head screw.

Selecting an appropriate installation location is crucial for accurate sensor measurements. To ensure measurement precision, follow these installation requirements:

1. The piezoelectric rain gauge should be installed horizontally on a bracket at a height of 0.5m or more above the ground.

2. Install the piezoelectric rain gauge in an open area, free from obstructions.

3. Keep the piezoelectric rain gauge away from vibration sources such as construction machinery and outdoor AC units.

Product Dimensions