Our company has newly developed a wireless remote interactive vibration sensor system. The sensor's collection time and method are entirely controlled by the host through commands.
Its main features include:
The sensor remains in a low-power state during normal operation
The sensor can respond to remote host control commands at any time
The sensor can collect characteristic values or raw acceleration data
Utilizes the latest LoRa technology, enhancing transmission speed
Synchronous data collection function for multiple vibration (or combined with current, voltage, etc.) sensors


These features make the sensor highly suitable for the following requirements:
Simultaneously meeting monitoring and diagnostic needs, collecting waveform files on demand. For example, during equipment startup, specific waveform data and spectrum analysis are required.
Data collection at specific times.
Synchronous multi-sensor data collection: In certain diagnostic scenarios, multiple vibration sensors can be required to collect data synchronously. Synchronization start accuracy is within 1ms.


Acceleration 0Hz～1KHz;
?Velocity 1Hz～1KHz;
?Displacement 1Hz～1KHz;
?Sampling rate configurable from 32Hz～4kHz;
?Sampling resolution 20bit, up to 3.9ug resolution
Measurement channels: 3-axis;
?Temperature measurement range -40℃ to 85℃, measurement accuracy ±0.5℃;
?LoRa 433MHz free frequency band;
?Effective transmission distance indoors >3000m (line of sight);
Triaxial acceleration value (±8G/±16G/±40G);
?Triaxial velocity value (0-500mm/s);
?Triaxial displacement value (0-20mm);
?Triaxial spectrum maximum frequency and amplitude value;
?Battery voltage, low voltage alarm;
?Triaxial gravity vector or tilt (can detect if the sensor position has moved);
?Acceleration time waveform (sent based on cloud commands);
?Battery capacity: Single AA lithium-thionyl chloride battery (capacity 19000mA/H).
A 12V~24V power supply version is also available.
?Battery life: >2 years when reporting characteristic values every 30 minutes;
?Protection rating: IP68 (built-in antenna version), corrosion-resistant surface;
?Installation methods: Magnetic mount/M8 thread/adhesive mounting options;