DOLPH-SPRAY ER-41 Red Varnish SYNTHITE ER-41 Red Insulating Varnish

Product Description: ER-41 is a high-temperature; fast-curing, air-drying, polyurethane varnish, and is an excellent insulator.

Coating for all electrical and electronic components. SYNTHITE ER-41 is also available in spray form, such as DOLPH-SPRAY ER-41.

Features and Advantages:

Fast drying, easy application, high-temperature rating, chemical resistance, UL recognized system

, covering power, usable for repair and manufacturing, oil and moisture resistance, good adhesion.

Typical Applications:

Field coils, control coils, motor frames, switch bases, molded bakelite, electrical connectors, fuse tubes, solenoid coils,

controller shafts, printed circuit boards, commutator ends, porcelain, solder joints, busbars, stator coil end turns.

Chemical Resistance

Water resistance: Excellent

Acid (10% sulfuric acid)                       Excellent

Alkali (1% sodium hydroxide)                     Excellent

Saltwater: Excellent

Oil, ASTM D-115                       Pass

No corrosive effect on copper

Application Guide:

Stir ER-41 to mix uniformly, as sedimentation may occur. Apply by brushing, dipping, or spraying. ER-41 can be used in many applications and adjusted for viscosity with T-200 thinner. For spraying, typically thin by about 20-30%.

In each application, the film thickness per side should be maintained at no more than 2.0 mils. This allows for complete solvent release and proper curing.

ER-41 will air-dry, allowing handling within 30 minutes. For chemical resistance, allow to air-dry for at least 24 hours.

Special Precautions

When applying ER-41 by spraying, care should be taken to keep the spraying area clean. Filters and other waste in the area should be soaked in water and disposed of in safe containers.

Storage and Shelf Life

Store in a cool, dry place (65-75°F, 18-24°C), away from direct sunlight.

Shelf life (in drums) - 1 year (at 21°C).

Shelf life (in aerosol cans) - 18 months at 70°F (21°C).