Chemical Odor Masking Agent-----Masking Odors, Emitting Fragrance

Now represented by Beijing Huaxia Keyuan Technology Development Center, this high-tech product from the USA includes various series of odor masking agents (also known as deodorizers and odor removers) such as water-based, oil-based, and universal water-oil types. The product is widely used in industries like coatings, adhesives, inks, and other chemical products with odors. It exhibits excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Using this product will mask various unpleasant odors from the original product, such as esters, benzene, ketones, alcohols, alkanes, ammonia, aldehydes, etc., while emitting a long-lasting fresh fragrance. It also achieves an ideal opening effect. With low usage (0.03%-0.05%) and high effectiveness, it is an ideal choice for modern chemical plants.

I. Solvent-Based---Odor Masking Agent

Overview: Solvent-based odor masking agents utilize the mutual transformation technology of masking agents and a small amount of modified fragrances to mask unpleasant solvent, resin, and monomer odors in adhesives (solvent-based), paints, inks, and rubber, such as xylene, coking benzene, gasoline, acetate esters, acrylate esters, ketones, aldehydes, or various odors in alkyd, acrylic, and polyurethane systems. Basic Properties: Appearance: Light-colored or colorless transparent oily liquid; Composition: 90-100% masking agent and 0-10% natural fragrance; Characteristics: Excellent compatibility with the system and superior masking performance. Product Introduction: Model Suitable Solvents Suitable Systems Special Recommendations WO-8008 Benzene-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive WO-7007 Benzene, Ketone, Alkane-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive WO-8600 Benzene, Ketone, Aldehyde-based Paints, Inks, Adhesives, Ketones, Aldehydes Polyester, Polyurethane Paint, Neoprene Adhesive, Polyurethane Shoe Adhesive, etc. WO-8030 Benzene, Kerosene, Coal Tar-based Paints, Inks, Adhesives Air Fresheners, Sprays, Rubber Adhesives, Printing Inks, and Adhesives WO-8072 Ethyl Acetate/Butyl Acetate Paints, Inks, Adhesives Ethyl Acetate/Butyl Acetate Composite Adhesives for Inks, Adhesives for Air Conditioner Paints WO-8080 Benzene, Ketone, Alcohol-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive

II. Universal Water-Oil Type--Odor Masking Agent

Overview: The universal water-oil type odor masking agent is a crystallization of advanced foreign technology. It uses organic mutual transformation of high-efficiency dispersants, masking agents, and natural fragrances to improve the odors of many chemicals through subtle physical and chemical effects, such as alcohols, ethers, ammonia, organic amines, residual resin monomers, etc. It is particularly suitable for emulsions, emulsified types, and alcohol-ether systems. It has become popular in developed countries like the USA, Japan, and France and is widely used in industries such as inks, leather, papermaking, textiles, adhesives, and emulsified coatings. Basic Properties: Appearance: Light yellow or white transparent liquid Composition: 80% masking agent, 10% modified fragrance, and 10% high-efficiency dispersant. Characteristics: Excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Product Introduction: Model Targeted Substances Applicable Systems Special Recommendations FB-8018 Aldehydes, Esters/Benzene, Pure Propylene-based Water-based Paints, Water-based Adhesives, Water-based Inks Water-based Wood Adhesives, Water-based Industrial Paints FB-8038 Residual Styrene, Ammonia/Amine Odors Water-based Paints, Water-based Adhesives, Water-based Inks Styrene-Acrylic Latex Paints, Modified Turpentine Inks, Polyamide Resins FB-8181 Butyl Acrylate-based Systems Water-based Paints, Water-based Adhesives, Water-based Inks Water-based Acrylic Systems: Water-based Paints, Inks, Adhesives FB-8108 Residual Styrene, Ammonia/Amine Odors Water-based Paints, Water-based Adhesives, Water-based Inks Styrene-Acrylic Latex Paints, Modified Turpentine Inks, Polyamide Resins Usage Method: This product is mainly added in the later stages, with extended stirring time of 15-30 minutes to ensure more uniform mixing for better results. Dosage: The general dosage is 0.03%-0.05%. (The amount can vary depending on the odor to be masked and the desired fragrance intensity.)

III. Water-Based--Odor Masking Agent

Overview: The RH series odor masking agent is a crystallization of advanced foreign technology. It uses organic mutual transformation of high-efficiency dispersants, masking agents, and natural fragrances to improve the odors of many chemicals through subtle physical and chemical effects, such as alcohols, ethers, ammonia, organic amines, residual resin monomers, etc. It is particularly suitable for emulsions, emulsified types, and alcohol-ether systems. It has become popular in developed countries like the USA, Japan, and France and is widely used in industries such as inks, leather, papermaking, textiles, adhesives, and emulsified coatings. Basic Properties: Appearance: Light yellow or white transparent liquid Composition: 80% masking agent, 10% modified fragrance, and 10% high-efficiency dispersant Characteristics: Excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Product Introduction: Model Solubility Applicable Range Effect RH-126 Water-soluble Styrene-Acrylic Systems, Ammonia/Amines, Alcohols, etc. Odor Removal, Fragrance Release RH-108 Water-soluble Pure Acrylic Systems, Ammonia/Amines, etc. Odor Removal, Fragrance Release RH-188 Water-soluble Vinyl Acetate-Acrylic, Tertiary Acrylic, Pure Acrylic Systems, Ammonia/Amines, etc. Odor Removal, Fragrance Release RH-818 Water-soluble Styrene-Acrylic Systems, Vinyl Acetate-Acrylic, Ammonia/Amines, Aldehydes, etc. Odor Removal, Fragrance Release Usage Method: This product is mainly added in the later stages, with extended stirring time of 15-30 minutes to ensure more uniform mixing for better results. Dosage: The general dosage is 0.03%-0.05%. (The amount can vary depending on the odor to be masked and the desired fragrance intensity.) Precautions: This product should be used in compatible systems.