Chemical Odor Masking Agent-----Masking Odors, Emitting Fragrance

Now represented by Beijing Huaxia Keyan Technology Development Center, this high-tech product from the USA includes water-based, oil-based, and universal water-oil compatible series of odor masking agents (also known as deodorizers and odor removers). This product is widely used in various odor-producing chemical industries such as coatings, adhesives, and inks. It exhibits excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Using this product will mask various unpleasant odors from the original product, such as esters, benzene, ketones, alcohols, alkanes, ammonia, and aldehydes, while emitting a long-lasting fresh fragrance. It also achieves an ideal opening effect. With low usage (0.03%-0.05%) and high effectiveness, it is an ideal choice for modern chemical plants.

I. Solvent-Based---Odor Masking Agent

Overview: Solvent-based odor masking agents utilize the mutual interaction technology of masking agents and a small amount of modified fragrances. They can mask unpleasant solvent, resin, and monomer odors in adhesives (solvent-based), paints, inks, and rubber, such as xylene, coking benzene, gasoline, acetate esters, acrylate esters, ketones, aldehydes, or various odors from alkyd, acrylic, and polyurethane systems. Basic Properties: Appearance: Light-colored or colorless transparent oily liquid; Composition: 90-100% masking agent and 0-10% natural fragrance; Characteristics: Excellent compatibility with the system and superior masking performance. Product Introduction: Model Suitable Solvents Suitable Systems Special Recommendations WO-8008 Benzene-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive WO-7007 Benzene, Ketone, Alkane-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive WO-8600 Benzene, Ketone, Aldehyde-based Paints, Inks, Adhesives, Ketones, Aldehydes Polyester, Polyurethane Paint, Neoprene Adhesive, Polyurethane Shoe Adhesive, etc. WO-8030 Benzene, Kerosene, Coal Tar-based Paints, Inks, Adhesives Air Fresheners, Sprays, Rubber Adhesives, Printing Inks, and Adhesives WO-8072 Ethyl Acetate/Butyl Acetate Paints, Inks, Adhesives Ethyl Acetate/Butyl Acetate Composite Adhesives for Inks, Adhesives for Air Conditioner Paints WO-8080 Benzene, Ketone, Alcohol-based Paints, Inks, Adhesives Polyester, Polyurethane Paint, Neoprene Adhesive

II. Universal Water-Oil Compatible---Odor Masking Agent

Overview: The universal water-oil compatible odor masking agent is the result of advanced foreign technology. It utilizes the organic interaction of high-efficiency dispersants, masking agents, and natural fragrances. Through subtle physicochemical actions, it can improve the odors of many chemicals, such as alcohols, ethers, ammonia, organic amines, and residual resin monomers. It is particularly suitable for emulsions, emulsified systems, and alcohol-ether systems. It has become popular in developed countries like the USA, Japan, and France and is widely used in industries such as inks, leather, papermaking, textiles, adhesives, and emulsified coatings. Basic Properties: Appearance: Light yellow or white transparent liquid Composition: 80% masking agent, 10% modified fragrance, and 10% high-efficiency dispersant. Characteristics: Excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Product Introduction: Model Targeted Substances Applicable Systems Special Recommendations FB-8018 Aldehydes, Esters/Benzene, Pure Acrylic Systems Water-based Paints, Water-based Adhesives, Water-based Inks Water-based Wood Adhesives, Water-based Industrial Paints FB-8038 Residual Styrene, Ammonia/Amine Odors Water-based Paints, Water-based Adhesives, Water-based Inks Styrene-Acrylic Latex Paints, Modified Turpentine Inks, Polyamide Resins FB-8181 Butyl Acrylate Systems Water-based Paints, Water-based Adhesives, Water-based Inks Water-based Acrylic Systems: Water-based Paints, Inks, Adhesives FB-8108 Residual Styrene, Ammonia/Amine Odors Water-based Paints, Water-based Adhesives, Water-based Inks Styrene-Acrylic Latex Paints, Modified Turpentine Inks, Polyamide Resins Usage Method: This product is primarily added in the later stages, with an extended stirring time of 15-30 minutes to ensure more uniform mixing for better results. Dosage: The general dosage is 0.03%-0.05%. (The amount can vary depending on the odor to be masked and the desired fragrance intensity.)

III. Water-Based---Odor Masking Agent

Overview: The RH series odor masking agent is the result of advanced foreign technology. It utilizes the organic interaction of high-efficiency dispersants, masking agents, and natural fragrances. Through subtle physicochemical actions, it can improve the odors of many chemicals, such as alcohols, ethers, ammonia, organic amines, and residual resin monomers. It is particularly suitable for emulsions, emulsified systems, and alcohol-ether systems. It has become popular in developed countries like the USA, Japan, and France and is widely used in industries such as inks, leather, papermaking, textiles, adhesives, and emulsified coatings. Basic Properties: Appearance: Light yellow or white transparent liquid Composition: 80% masking agent, 10% modified fragrance, and 10% high-efficiency dispersant Characteristics: Excellent compatibility with resins, solvents, and pigments, along with superior dispersion and stability. Product Introduction: Model Solubility Applicable Range Effects RH-126 Water-based Styrene-Acrylic Systems, Ammonia/Amines, Alcohols, etc. Odor Removal, Fragrance Release RH-108 Water-based Pure Acrylic Systems, Ammonia/Amines, etc. Odor Removal, Fragrance Release RH-188 Water-based Vinyl Acetate-Acrylic, Tertiary Acrylic, Pure Acrylic Systems, Ammonia/Amines, etc. Odor Removal, Fragrance Release RH-818 Water-based Styrene-Acrylic Systems, Vinyl Acetate-Acrylic, Ammonia/Amines, Aldehydes, etc. Odor Removal, Fragrance Release Usage Method: This product is primarily added in the later stages, with an extended stirring time of 15-30 minutes to ensure more uniform mixing for better results. Dosage: The general dosage is 0.03%-0.05%. (The amount can vary depending on the odor to be masked and the desired fragrance intensity.) Precautions: This product should be used in compatible systems.