HSY-5199 Pipe Thread Compound Penetrometer (Standard Full Cone Included) is designed and manufactured in accordance with the technical requirements and relevant provisions of the standard SY/T 5199-1997 "Thread Compound for Casing, Tubing, and Line Pipe" and GB/T 269 "Standard Test Method for Cone Penetration of Lubricating Grease". It is primarily used for testing the cone penetration of thread compounds. The worked penetration is an indicator of the consistency (hardness) of the thread compound. According to standard requirements, the worked penetration of pipe thread compound should be between 310-340 (0.1mm) at 25 degrees cone penetration value. At -17.8 degrees, the cone penetration value should be not less than 200 (0.1mm). This instrument can also be used with additional accessories for testing materials such as solid fine particles, powders, colloids, frozen substances, as well as food raw materials like cheese, gum, tallow, margarine, cream, and fermented substances. It is widely applicable in the food industry, transportation and highway engineering, and other industrial sectors.

I. Main Features

1. Uses a digital display to show the penetration value, providing clear and intuitive readings.
2. The penetration time control device has 6 settings with high timing accuracy.
3. Features electric coarse and fine adjustment of the lifting frame, making adjustment convenient and ensuring accurate cone alignment.

4. The cone rod assembly is precisely weighted, strictly complying with standards, and allows for quick and easy verification.
5. Versatile in use, it can also be equipped with optional accessories such as standard cones, sample cups, thermometers, and weights, making it suitable for measurements according to national standards GB/T 4509-1998, GB/T 4509-2010, and the highway standard JTG E20-2011 T0604-2011.

The most notable features of this instrument are: it holds a software copyright certificate (Certificate No.: 6097415); advanced mechanical design for convenient lifting adjustment; and a high-precision digital penetration tester for reliable measurement results.

II. Main Technical Parameters

1. Measurement range: (0–700) penetration;

2. Penetration time control device:可選5 seconds, 8 seconds, 10 seconds, 12 seconds, 30 seconds, or 60 seconds, with a time error of less than ±0.1 seconds;

3. Resolution: 0.01 mm;

4. Penetration accuracy: ±1 penetration;

5. Standard cone: Standard full cone: full cone (102.5±0.05)g, compliant with the specifications of national standard GB/T 269;

Optional 1/2 cone and 1/4 cone are also available.

6. Lifting bracket: Electric adjustment with dual coarse and fine lifting mechanisms for easy alignment of the cone tip with the sample surface;

7. Power supply:  AC (220±10%)V, 50Hz, power consumption not exceeding 300W.

8. Dimensions:  280mm×350mm×700mm (L×W×H).

9. Other: Equipped with a cold light source and magnifying glass for ease of use and operation.

(The following schematic shows the test head as a cone. This instrument is also compatible with needle attachments and can be optionally equipped with a constant temperature bath, grease worker, or 100,000-cycle automatic grease shear tester.)