Lake Water Testing Service
Contact Info
- Add:廣東省佛山市順德區(qū)容桂容里建豐路13號(hào)六樓, Zip: 528308
- Contact: 佳譽(yù)
- Tel:400-9269-886
- Email:501649128@qq.com
Other Products
Lake Water Testing
1. Introduction to Lake Water Testing
A lake is a slow-moving body of water formed by the accumulation of water in land depressions.
2. Testing Items
Lake Water Testing Items and Limits
Item | Limit | |
Chemical Indicators | Turbidity | Not exceeding 1 NTU①, and not exceeding 5 NTU under special circumstances |
pH | 6.5–8.5 | |
Total Hardness (as CaCO?) | 450 (mg/L) | |
Aluminum | 0.2 (mg/L) | |
Iron | 0.3 (mg/L) | |
Manganese | 0.1 (mg/L) | |
Copper | 1.0 (mg/L) | |
Zinc | 1.0 (mg/L) | |
Volatile Phenols (as phenol) | 0.002 (mg/L) | |
Anionic Synthetic Detergents | 0.3 (mg/L) | |
Sulfates | 250 (mg/L) | |
Chlorides | 250 (mg/L) | |
Total Dissolved Solids | 1000 (mg/L) | |
Oxygen Consumption (as O?) | 3 (mg/L), not exceeding 5 mg/L under special circumstances② | |
Toxicological Indicators | Arsenic | 0.05 (mg/L) |
Cadmium | 0.005 (mg/L) | |
Chromium (Hexavalent) | 0.05 (mg/L) | |
/ | 0.05 (mg/L) | |
Fluorides | 1.0 (mg/L) | |
Lead | 0.01 (mg/L) | |
Mercury | 0.001 (mg/L) | |
Nitrates (as N) | 20 (mg/L) | |
Selenium | 0.01 (mg/L) | |
Tetrachloroethylene | 0.002 (mg/L) | |
Chloroform | 0.06 (mg/L) | |
Bacteriological Indicators | Total Bacterial Count | 100 (CFU/mL)③ |
Total Coliforms | Not detectable in 100 mL water sample | |
Fecal Coliforms | Not detectable in 100 mL water sample | |
Free Residual Chlorine | Should be no less than 0.3 mg/L after 30 minutes of contact with water, and no less than 0.05 mg/L at the end of the pipe network (applicable for chlorination disinfection) | |
Radioactive Indicators④ | Total α Radioactivity | 0.5 (Bq/L) |
Total β Radioactivity | 1 (Bq/L) | |
Note: ① NTU in the table stands for Nephelometric Turbidity Unit. ② Special circumstances include source water limitations, etc. ③ CFU stands for Colony Forming Unit. ④ The values for radioactive indicators are not limits but reference levels. When radioactive indicators exceed the values specified in Table 2-1, nuclide analysis and evaluation must be conducted to determine whether the water is drinkable. | ||
| Industry Category | Others |
|---|---|
| Product Category | |
| Brand: | |
| Spec: | |
| Stock: | |
| Origin: | China / Guangdong / Foshanshi |
