Jiali High Pressure Pump can be filled with oil, water, and most corrosive liquid media. The pump body is made of aluminum alloy and stainless steel cylinder plungers, with corresponding material seals used based on the pressurized medium. Working characteristics of Jiali High Pressure Pump: 1. High output pressure: Liquid output pressure can reach 350Mpa. 2. Wide range of applications: Working media include hydraulic oil, water, and most chemically corrosive liquids. 3. Broad output range: All models operate smoothly with only 0.3Mpa air pressure, achieving the minimum flow rate; different flow rates can be obtained by adjusting the air intake. 4. Flexible application: Different pressure ranges can be achieved by selecting different pump models. 5. Easy adjustment: Within the pump's pressure range, adjusting the pressure regulator valve changes the input air pressure, allowing stepless adjustment of the output hydraulic pressure. 6. Automatic pressure maintenance: If the pressure in the pressure maintenance circuit drops for any reason, the pump will automatically start to replenish the leakage and maintain constant circuit pressure. 7. Safe operation: Gas-driven operation, with no arcs or sparks, making it suitable for use in hazardous environments. 8. Simple maintenance: Compared to other air-driven pumps, Jiali liquid pumps can perform the same tasks with fewer parts and seals, making maintenance simpler. 9. Jiali gas-liquid booster pump is a plunger-type pump. During operation, it rapidly reciprocates; as the output pressure increases, the reciprocating speed slows down until it stops. At this point, the output pressure remains constant, energy consumption is low, and all components cease movement. Typical applications of Jiali High Pressure Pump: 1. Static testing for valves, pipe fittings, pressure vessels, etc. 2. Testing of automotive brake systems and fuel injectors. 3. Hydraulic pressure testing for building material testing machines. 4. Injection of chemical reagents into pipelines or reaction vessels. 5. Power for hydraulic equipment such as clamping, forming, drilling, shearing, and punching. 6. Overload protection, mold buffering, and lifting power for large presses. 7. Power for steel bar connectors. 8. Static and dynamic testing of aerospace components. 9. Performance testing and calibration of instruments and meters. 10. Water jetting for high-pressure cleaning and waterjet cutting equipment. 11. Lubrication system oil injection for mechanical equipment. 12. Control of surface safety valves and subsurface safety valves.