I. The double barrel return oil filter element 0660R010ON can be installed in pressure pipelines of different pressure levels to further remove or block impurities caused by external contamination, wear during component operation, and chemical reactions of the medium itself. It is particularly suitable for automatic control systems and servo systems. It prevents high-precision control components and actuators from premature wear or jamming due to contamination, thereby reducing failures and extending the service life of components. The filter RFDBN/HC660DAN10D1./-L24 element uses imported glass fiber filter material, featuring high filtration accuracy, strong oil flow capacity, low initial pressure loss, and high dirt holding capacity.

II. The double barrel return oil filter element 0660R010ON is installed in the pressure pipelines of hydraulic systems to filter out mechanical impurities mixed into the hydraulic oil and gums, asphaltenes, carbon residues, etc., produced by chemical changes in the hydraulic oil itself. This prevents valve jamming, clogging of throttle orifices and damping holes, and rapid wear of hydraulic components.

III. It offers excellent filtration effect and high accuracy, but cleaning after clogging is difficult, requiring replacement of the filter element.

IV. Equipped with a differential pressure signaling device, when the filter element is contaminated and clogged to the point where the inlet and outlet oil pressure difference reaches 0.35 MPa, a switch signal is sent. At this point, replace the filter element to protect the system's safety.

V. Using new chemical fiber filter material, it features high filtration accuracy, strong oil flow capacity, low initial pressure loss, and high dirt holding capacity. Its filtration accuracy is calibrated by filtration ratio β3, 5, 10, 20 > 100, with filtration efficiency n ≥ 99%, complying with ISO standards.

Note: Double barrel return oil filter RFDBN/HC660DAN10D1./-L24 is equipped with: 24V voltage indicator light

P20NL6S50B

P20NL6S50V

P20NL6S74B

P20NL6S74V

P20NL8B100B

P20NL8B25B

P20NL8D03B

P20NL8D05B

P20NL8D10B

P20NL8D20B

P20NL8E03B

P20NL8E05B

P20NL8E10B

P20NL8E20B

P20NL8F03B

P20NL8F05B

P20NL8F10B

P20NL8F20B

P20NL8G03B

P20NL8G05B

P20NL8G10B

P20NL8G20B

P20NL8S100B

P20NL8S200B

P20NL8S25B

P20NL8S50B

P210HL1F03B

P210HL1F05B

P210HL1F10B

P210HL1F20B

Little knowledge:

According to the installation position, HYDAC filters can be divided into: suction filters, return filters, pressure line filters.

1. Suction filter: Filter installed on the suction pipeline.

2. Return filter: Filter installed at the tank return port and on the return pipeline.

3. Pressure line filter: Filter installed on the pressure pipeline.

【Double Barrel Return Oil Filter RFDBN/HC330DAN20D1./-KB24 - Jiale】

【Filter Element 0660D010BN4HC - Jiale】

Jiale Filter Co., Ltd. Edited and compiled information 《Please indicate the source when reprinting》 Thank you for your cooperation!!!