Dongguan Hongfenghao Technology Co., Ltd. Pad Printing Silicone for Printing on Wood, Ceramics, and Transfer of Surface Patterns on Stationery, etc.

The company has upgraded and improved the original pad printing silicone using new technology, effectively enhancing the ink transferability, wear resistance, and pattern clarity of the silicone pad. It is suitable for transferring surface patterns on plastics, hardware, wood, ceramics, crafts, stationery, etc. Customers are welcome to request samples and trials.

Hongfenghao Pad Printing Silicone Usage Instructions:

1. First, clean the mold with detergent, wipe or blow dry any moisture in the mold, and apply a layer of release agent or petroleum jelly.

2. Mix components A and B thoroughly according to the weight ratio (using an electronic scale for accuracy).

3. For customers who need to add silicone oil, first mix silicone A and silicone oil in a ratio of 10:3 (the amount of silicone oil added depends on customer requirements and should not be excessive). After mixing silicone and silicone oil thoroughly, add component B curing agent according to the silicone ratio and mix again until uniform.

4. Place the thoroughly mixed silicone into a vacuum machine for vacuum degassing.

5. After vacuum degassing, pour the silicone into the mold and allow it to cure at room temperature or with heating (room temperature curing takes 2-12 hours; heating at 80-120°C can achieve full curing in 10 minutes).

6. Demold the fully cured silicone.

7. Friendly reminder: When handling this product, use containers separate from those used with condensation-type silicone (industrial grade). Use molds that have not been used with condensation-type silicone for this product.