Product Features
· Water-based, environmentally friendly, odorless, and safe.
· Resistant to penetration, cold, heat, and various types of erosion.
· Excellent wear resistance.
· Can be applied on damp substrates without standing water.

Product Application
Used for high-strength floor leveling and reinforcement.

Application Sites
Underground parking lots, terraces, balconies, storage pools, tunnels, culverts, ordinary electronic workshops, food workshops, hospitals, clean and dust-free workshop floor substrates for precise leveling, as well as general ground reinforcement and leveling projects.

Packaging Specification
25 kg/set (A: 1 kg + B: 4 kg + C: 20 kg)

Usage Method
1. Clean the base layer thoroughly, removing dust, oil stains, and other substances that may hinder adhesion, then apply a roller coat for sealing treatment.
2. According to the ratio, first pour Component A and Component B into a clean mixing bucket. Use an electric mixer to blend at medium speed until uniform, then add powdered Component C. Mix at high speed for 3-5 minutes until the mixture becomes a smooth, particle-free liquid. Let it sit for 1-2 minutes to allow all additives in the system to fully mature and react, then stir slightly before use.
3. Pour the mixed material onto the ground that has been pre-treated with a sealing primer. Use a 3mm or 5mm notched trowel to assist in leveling to the required thickness, and simultaneously use a deaeration roller for bubble elimination.

Dosage and Application Thickness
Typically, about 2 kg/m2 per mm on a flat substrate. The application thickness depends on the width of the trowel notch, with a minimum single layer of 1.5mm and a maximum of 3.0mm. The desired thickness can be achieved through multiple applications based on design requirements.