Sichuan Chengdu/Yunnan Epoxy Asphalt Paint Manufacturer - Epoxy Asphalt Coating [Guanpai Paint Order Hotline: 152~0825~6966 Manager Sun]Epoxy asphalt paint is a high-performance anti-corrosion coating suitable for harsh environments and heavy corrosion conditions. Main application scenarios include:

Underground facilities: Such as basements, tunnels, pipe galleries, and other humid environments, providing long-term resistance to moisture penetration.
Industrial sectors: Chemical workshops, sewage treatment tanks, storage tank interiors, and other areas requiring resistance to acids, alkalis, and chemical corrosion.
Marine engineering: Dock steel piles, offshore platforms, and other environments with severe salt spray corrosion.
Municipal infrastructure: Bridge piers, underground pipelines, and other concrete or metal substrates requiring waterproofing and rust prevention.
Product Advantages
Strong adhesion: The composite system of epoxy resin and asphalt ensures tight bonding to various substrates, including metal and concrete.
Corrosion resistance: Resists erosion from water, acids, alkalis, salts, and some organic solvents, with a service life of over 10 years.
Waterproof and anti-permeability: The dense paint film effectively blocks moisture and chloride ion penetration, protecting the substrate structure.
Excellent mechanical properties: High wear resistance and impact resistance, suitable for areas subject to vehicle traffic or mechanical wear.
Construction Guide
Surface preparation: Remove rust and oil contamination. Metal surfaces must meet the Sa2.5 rust removal standard, and concrete moisture content should be ≤8%.
Mixing ratio: Mix the epoxy component and asphalt component according to the manufacturer's instructions, stir evenly, and allow to mature for 10-15 minutes.
Application methods: Brushing, rolling, or spraying are all acceptable. It is recommended to apply 2-3 coats with a 24-hour interval between each coat (at 25°C).
Environmental requirements: Application temperature should be between 5-40°C, humidity ≤85%. Do not apply during rain or snow.
Curing time: Surface drying takes 4-6 hours, while full curing requires 7 days (adjust based on temperature and humidity).
Some content in this article is sourced from the internet. If any issues arise, please contact us, and we will address them promptly. Thank you.