Industrial pH Electrode
Contact Info
- Add:上海市嘉定區(qū)銀裕路A棟二層, Zip:
- Contact: 羅先生
- Tel:021-59996866
- Email:chinainfo@fesks.com.cn
Other Products
Fesks pH Electrode KSPH 130 Detailed Introduction:
The imported tap water/seawater pH electrode KSPH 130 from UK-based Fesks is a combination electrode (measurement + reference), offering high cost-effectiveness. It features a robust cylindrical bulb, double-junction design, and a stable external reference system. Suitable for: tap water, seawater, environmental monitoring, etc.
Compatible Controllers:
FSPH 3700 Basic Controller
FSPH 5280 Intelligent Controller
UK Fesks pH Electrode KSPH 130Technical Parameters
Measurement Range: | 0~14 pH |
Temperature Range: | -5~100°C |
Resolution: | 0.01 pH |
Accuracy: | ±0.01 pH |
Pressure Range: | 0~6 Bar |
Temperature Compensation Type: | Pt1000 |
Membrane Resistance: | < 250 MΩ |
Zero Potential: | 7±0.25 pH |
Response Time: | < 30 S |
Salt Bridge Type: | Ceramic Core |
Reference Type: | Ag/AgCl |
Electrode Material: | Glass |
Electrolyte: | Gel |
Installation Thread: | PG13.5 |
Electrode Dimensions: | ?12*120 mm |
Cable Length: | Standard 5 m |
KSPH Series pH/ORP Electrodes
| KSPH 130A Electrode Suitable for pH measurement in general wastewater and tap water | KSPH 130B Electrode Suitable for pH measurement in heavy metals, high chlorine, ammonia water, and chemical wastewater |
| KSPH 155T Electrode Suitable for pH measurement in desulfurization | KSPH 160HF Electrode Suitable for pH measurement in hydrofluoric acid-containing water |
| KSPH 165G Electrode Suitable for pH measurement in general high-temperature media | KSPH 170GF Electrode Suitable for pH measurement in high-temperature fermentation |
| KSPH 170GH Electrode Suitable for pH measurement in high-temperature heavy metals, high chlorine, ammonia water, and chemical applications | MODEL: KSPH 180D Electrode Suitable for pH measurement in low-temperature media |
| KSPH 185C Electrode Suitable for pH measurement in low conductivity water such as pure water and RO water | MODEL: KSOP 190 Electrode Suitable for ORP measurement in general water treatment and highly polluted wastewater |
Daily Maintenance of Electrodes
1. General contamination: Clean the electrode with water, 0.1 mol/L NaOH, or 0.1 mol/L HCl for several minutes.
2. Oil or organic contamination: Clean the electrode with acetone or ethanol for several seconds.
3. Sulfide contamination (blackened diaphragm): Clean with a mixture of 10% HCl and saturated thiourea.
4. Protein contamination (yellowed diaphragm): Clean with a mixture of 10% HCl and saturated pepsin.
Note: When the measured medium causes sulfide or protein contamination, timely treatment is required.
pH Electrode Storage
1. When not in use for extended periods, store the electrode in saturated KCl solution or buffer solution.
2. Do not store the electrode dry or with dried medium on the surface. Dry-stored electrodes should be activated in a suitable storage solution before use.
3. Electrodes can be activated in pH 4 buffer solution or 3M HCl (or saturated KCl).
4. Do not store electrodes in distilled water.
| Industry Category | Chemicals/Gases/Nitrous Oxide |
|---|---|
| Product Category | |
| Brand: | Fesks/英國(guó)費(fèi)思克 |
| Spec: | KSPH 130 |
| Stock: | 1000 |
| Manufacturer: | |
| Origin: | China / Shanghai / Jiadingqu |
