Product Introduction

       The NDFJ-II SF? Decomposition Product Tester enables rapid on-site detection and diagnosis of early-stage faults inside SF? electrical equipment (such as circuit breakers, transformers, GIS, bushings, etc.) by simultaneously monitoring three decomposition products: SO?, H?S, and CO.

        This instrument is widely applicable to SF? electrical equipment in the power, railway, metallurgy, and petrochemical industries.

Product Features

       Faults in SF? electrical equipment are categorized into internal body faults and operating mechanism faults. Internal faults involving solid insulation significantly impact equipment safety and can be divided into discharge and overheating types. Discharge faults are further classified into floating potential discharge, ground discharge, and inter-turn discharge.
       Currently, common electrical tests domestically and internationally are typically performed during power outages and exhibit low detection rates for critical insulation defects. The NDFJ-II SF? Decomposition Product Tester, produced by our company, is an intelligent instrument with high sensitivity, stability, and ease of operation. It automatically diagnoses and provides handling suggestions based on detected concentrations, offering a simple and effective means for early detection of internal faults in SF? electrical equipment.

Technical Parameters

☆、Detection Limit: 0.1 ppm

☆、Stability: Zero drift ≤ ±0.1 ppm when temperature changes from 20°C to 40°C

☆、Accuracy: Error ≤ ±0.1 ppm when measurement ≤ 2 ppm

Error ≤ ±0.2 ppm when measurement > 2 ppm

☆、Measurement Range: SO?: 0–100 μL/L

                        H?S: 0–100 μL/L 

                        CO: 0–1000 μL/L

☆、Measurement Tolerance: SO? ≤ 10 μL/L, ±1 μL/L; SO? > 10 μL/L, ±10%

                            H?S ≤ 10 μL/L, ±1 μL/L; H?S > 10 μL/L, ±10%

                            CO ≤ 50 μL/L, ±4 μL/L; CO > 50 μL/L, ±8%

☆、Repeatability: SO? ≤ 10 μL/L, ±0.5 μL/L; SO? > 10 μL/L, ±5%

                            H?S ≤ 10 μL/L, ±0.5 μL/L; H?S > 10 μL/L, ±5%

                            CO ≤ 50 μL/L, ±2 μL/L; CO > 50 μL/L, ±4%

☆、Resolution: SO? ≤ 0.1 μL/L, H?S ≤ 0.1 μL/L, CO ≤ 1 μL/L

☆、Response Time: Not exceeding 5 minutes

☆、Pressure: Pipeline pressure resistance not less than 1 MPa

☆、Temperature Range: –40°C to +50°C

☆、Humidity Range: ≤95% RH

☆、Atmospheric Pressure: 86 kPa to 106 kPa

☆、Built-in Power Supply: Internal rechargeable battery, capable of continuous operation for over 10 hours when fully charged

☆、Dimensions: 252 × 310 × 98 mm

☆、Weight: 2.5 kg

☆、Communication: RS232