FTM-Low Temperature Laser Displacement Sensor

I. Product Introduction:

The FTM-Low Temperature Laser Displacement Sensor is a long-range laser displacement sensor developed and produced by Beijing Feituo Xinda Laser Technology Co., Ltd. It features a large measuring range, high accuracy, with the highest precision reaching ±1mm.

The FTM-Low Temperature Laser Displacement Sensor is equipped with a variety of industrial data interfaces (RS232, RS485, RS422, TTL, 4–20mA, etc.), and has strong anti-interference capabilities. It is widely used in various industrial control applications such as the steel industry, metallurgical industry, automotive industry, printing industry, food industry, as well as in various field monitoring and inspection scenarios.

1. Measure distances of various objects using a reflector;

2. High-temperature objects can be measured with a filter;

3. Explosion-proof housing can be used in explosive environments;

4. Swing motor can be used for 2D profile measurement.

III. Performance Specifications

Laser Characteristics: Red laser diode.

Wavelength: 620nm to 6 low temperature nm.

Laser Class: Class 2.

Spot Type: Point or line.

Spot Size: Point spot 3mm@10m, line spot 3mmX1 low temperature mm@10m.

Output Power: Less than 1mW.

2. Electrical Parameters

Operating Voltage: 5V to 24V.

Current: Less than 170mA.

Output Format: Digital RS232, RS485, or RS422; Analog 4–20mA.

3. Mechanical Parameters

Housing Material: Aluminum alloy with coating or spray painting.

Window: Glass window.

Wiring Method: Aviation connector or reserved 1m cable.

4. Environmental Parameters

Protection Rating: Waterproof and dustproof, IP65 rating, according to IEC529 standard.

Storage Temperature: -40℃ to +80℃.

IV. Technical Parameters

1. Detection Range: 0.05–200m (customizable);

2. Accuracy: ±1mm;

3. Resolution: 1mm;

4. Sampling Frequency: 2Hz–10Hz;

5. Operating Temperature: -40℃ to +50℃;

7. Operating Voltage: DC 5V–24V;

8. Power Consumption: 1.5W;

9. Output Format: RS232, RS485, 4–20mA, 0–5V, 0–10V, PNP (choose one);

10. Spot Diameter: 10mm@30m;

11. Dimensions: 25*53*93mm.

V. Maintenance and Care

1. Clean and keep dry.

2. Blow dust off the lens surface.

3. Do not touch the lens with fingers.

4. Use only a clean, soft cloth for wiping. If necessary, moisten the cloth with pure alcohol or water.

5. If the instrument gets wet accidentally, do not expose it to direct sunlight; allow it to air dry.

6. If not in use for an extended period, turn off the power to avoid affecting its lifespan.