CYW34-H Industrial Pneumatic Airless Sprayer

I. Introduction to Airless Spraying:

Airless spraying refers to a spraying method where the main unit pressurizes the liquid material, delivers it through the material hose to the nozzle, and the liquid is atomized into paint mist by the nozzle and sprayed onto the workpiece surface. Because the liquid is atomized under high pressure and does not need to mix with compressed air, this differs from traditional air spraying and is therefore called airless spraying.

The main components of airless spraying equipment include the main pump, high-pressure material hose, spray gun, and nozzle. Customers can also opt for a mixer and stainless steel material bucket.

II. Characteristics of Airless Spraying:

1. Since compressed air is not required for atomization, the liquid material is concentrated with minimal rebound and splatter. Compared to air spraying, it can save 30%-50% of paint.

2. The coating efficiency of airless sprayers is three times higher than air spraying and over ten times higher than brushing.

3. Airless spraying can achieve a thicker coating film, reduce the number of spraying passes, improve coating efficiency, and is suitable for large-area thick coating applications.

4. During spraying, there is minimal rebound and splatter of liquid material, improving the working environment and reducing contamination for operators, making it more environmentally friendly compared to air spraying.

5. It can spray higher viscosity liquids, requiring less diluent, thereby reducing VOC emissions.

6. Among them, pneumatic airless sprayers use compressed air as the power source, are explosion-proof, do not overheat during prolonged continuous operation, and have low maintenance rates.

III. Selection of Airless Spraying Equipment:

There are various models of airless spraying equipment, which can be selected based on the following three aspects:

1. Select based on the characteristics of the coating. First, consider the viscosity of the coating; for higher viscosity coatings, choose equipment with a high pressure ratio or with a heating device.

2. Select based on the shape of the workpiece and production batch. For small workpieces or small batch spraying, generally choose models with smaller displacement. For large workpieces such as ships, bridges, automobiles, or continuous automated spraying, choose models with larger displacement.

3. Select based on the power source available at the worksite.

IV. CYW34-H Pneumatic Airless Sprayer:

1. Technical Parameters:

Comparison of Our Pneumatic Sprayer with Similar Products on the Market:

V. Main Configuration:

Pneumatic sprayer, high-pressure spray gun, spray gun extension rod, high-pressure material hose, etc.

VI. Application Scenarios:

Architectural spraying, heavy machinery spraying, petroleum and petrochemical spraying, steel structure spraying, etc.