Basic Introduction:
1. Manufactured in accordance with relevant clauses of GB4706.1, GB/T16842, GB2099.1, and corresponding standards such as IEC61032 and UL.

2. The test probe is an essential instrument for conducting electric shock protection tests for household and similar electrical appliances.
How to Use the Test Probe
1. Connect a power supply of not less than 40V and not more than 50V, with one end connected in series with a light bulb and then to the wire of the test probe (or pin, rod), and the other end connected to the sample under test;
2. According to the regulations, bring the test probe (or pin, rod) into contact with the sample under test. If the light bulb lights up, it is unqualified; otherwise, it is qualified.

Probe No. 11 (Test Probe)

Product Overview: Complies with standards such as IEC61032 Figure 7 Test Probe 11, GB/T16842 Test Probe 11, GB8898, IEC60065, IEC60598, GB7000, IEC60335, GB4706, etc.

Used to inspect the prevention of human contact with components and to test the mechanical strength of housing openings or internal baffles of the housing.

● Customizable with 10～50N thrust

● Customizable with 10～75N thrust

● Customizable with 5～30N thrust

Technical Parameters:

Probe diameter: 12 mm

Probe length: 80mm

Baffle diameter: 50mm

Baffle length: 100mm