Equipment name：(DN1-DN2)*L two-dimensional gantry-type winding machine

Note: When ordering, please specify the range of DN1 (minimum diameter of product), DN2 (maximum diameter of product), L≤6000mm

Equipment composition: gantry-type track, drive spindle, moving tailstock, winding trolley, dipping system, guide roving and creel.

Scope of application:

It is suitable for the production of FRP pipes with diameter Ф10-1000mm and length not longer than 6000mm.

According to the user's requirements, the equipment can meet the production of unsaturated polyester resin and epoxy fiberglass pipe.

The equipment is suitable for production of pipes of different fiber types: ordinary glass fiber, carbon fiber, aramid fiber and basalt fiber

Main parameters and characteristics:

   1. Product diameter: Ф10mm-Ф1000mm 
   2. Product length: ≦6000mm
   3. Winding angle：≥45°≤89° (When the pins are hung on both ends of the mold, the winding machine can meet ≥0°≤90°)
   4. Roving-drawing speed：≤100m/min
   5. Main shaft speed：≤78rpm.
   6. Trolley speed：60m/min.
   7. Control method:Spindle, trolley dual servo + digital control system
   8. Resin tank: Equipped with heating function to meet the production of epoxy resin products
   9. Creel: Users can choose from the following three types according to different product requirements.
              Simple tension creel
              Mechanical tension creel
              Electronic tension creel
   10. Total equipment power：15KW±5KW
   11. Equipment occupied area: Width:10000mm, Length:8600mm (The product length is 6000mm).