Mixing Station Enclosure Dust Removal and Cooling Spray Machine, Construction Site Wall Dust Suppression Spray Equipment, Vertical Spray System

Mines, coal storage yards, smelting, ceramics, deodorization, dust prevention, outdoor occasions, factories and enterprises, greenhouses, workshops (wood processing), textile workshops, printing workshops, paint booths, sewage treatment, etc. 1. Uses digital chip control, integrating automatic control of upper and lower liquid levels and pressure
2. Offers automatic and manual working modes for selection
3. Features protection functions such as overload, no-load, phase loss, and ultra-low pressure
4. Includes a no-load restart function, adjustable time from 1 to 240 minutes
5. Equipped with a fault memory function, allowing review of the last 5 fault causes
6. Easy installation and simple debugging system composition
The spray system mainly consists of PPR water pipes, straight connectors, tees, elbows, and other components to form the water flow pipeline. The water tank provides the spray water source, the multi-stage pump supplies the transportation power, and the intelligent controller controls the entire system.
1. Intelligent Controller: Uses digital chip control, integrating automatic control of upper and lower liquid levels and pressure; offers automatic, manual, and remote control working modes for selection; features protection functions such as overload, no-load, phase loss, and ultra-low pressure; includes a no-load restart function, adjustable time from 1 to 240 minutes; equipped with a fault memory function, allowing review of the last 5 fault causes; easy installation and simple debugging.
2. Multi-Stage Pump: Requires filling the pump with water before starting; must open the outlet valve during startup to reduce the motor's starting load and prevent motor burnout; when the pump's usage pressure decreases, the number of paper gaskets between the pump body and pump cover can be reduced; adjusting pressure too high may burn out the motor.
3. Water Tank: The water tank is equipped with an automatic water level control valve. When the water level in the tank is insufficient, the switch opens to automatically replenish the water source; when the water level reaches a certain height, the control valve automatically closes to stop water replenishment. Equipment Parameters
Head: 160m
Flow Rate: 6m3/h
Pressure: 1-3Mpa
Range: Spray 2 meters, Water Jet 8 meters
Power: 7.5kw
Speed: 2900r/min
Frequency: 50Hz
Voltage: 380V
Current: 15A
Installation Environment Requirements Operating Temperature: -10℃ to 40℃
Humidity: Relative humidity not exceeding 90%
Altitude: Not exceeding 2000 meters
Probe Wire Temperature Resistance: 105℃ Water Pump Installation: