Introduction to Insulating Rubber Mats:

Insulating rubber mats, also known as insulating mats, insulating pads, insulating gaskets, or insulating blankets, are widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors.

Made from rubber insulating materials, the upper and lower surfaces of the insulating mat should be free from harmful irregularities. Harmful irregularities refer to features that disrupt uniformity or damage the smooth surface profile, such as small holes, cracks, local bulges, cuts, embedded conductive foreign objects, folds, voids,凹凸波紋, and casting marks. Harmless irregularities refer to surface irregularities formed during the production process.

Characteristics and Application Scenarios of 15KV Insulating Rubber Mats

Excellent physical and mechanical properties, with superior insulation performance, suitable for use in dry environments with high dielectric requirements between -35°C and +100°C. Tested at 43KV, it operates normally at 660V. Widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors. It should be stored in a dry, ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils, and do not store outdoors to prevent direct sunlight.
Technical Parameters of Insulating Rubber Mats

1. Classified by voltage resistance:

★★5kv【Insulating Rubber Mat】

Technical parameters: Thickness 3mm; Colors red, black, green; Specific gravity: 5.8KG/m2

★★15KV【Insulating Rubber Mat】

Technical parameters: Thickness 5mm; Colors red, black, green; Specific gravity: 9KG/m2

★★20KV【Insulating Rubber Mat】

Technical parameters: Thickness 6mm; Colors red, black, green; Specific gravity: 11KG/m2

★★25KVInsulating Rubber Mat

Technical parameters: Thickness 8mm; Colors red, black, green; Specific gravity: 14.5KG/m2

★★30KVInsulating Rubber Mat

Technical parameters: Thickness 10mm; Colors red, black, green; Specific gravity: 18KG/m2

★★35KVInsulating Rubber Mat

Technical parameters: Thickness 12mm; Colors red, black, green; Specific gravity: 21.6KG/m2

2. Classified by color:

◆RedInsulating Rubber Mat

◆BlackInsulating Rubber Mat

◆GreenInsulating Rubber Mat

3. Classified by thickness:

●3mm, 5mm, 6mm, 8mm, 10mm, 12mm

Insulating Rubber MatUsage Range and Storage Method

Insulating rubber mats are widely used in substations, power plants, distribution rooms, laboratories, and live working outdoors.

They should be stored in a dry, ventilated environment, away from heat sources, and at least 20cm above the ground and walls. Avoid contamination by acids, alkalis, and oils, and do not store outdoors to prevent direct sunlight.

1. Our products are made from non-polar pure rubber with excellent insulation properties, such as NR and SBR.

2. Our products do not contain inferior rubber, waste rubber, recycled rubber, or any plastic components.

3. Stable surface and volume resistance, high specific gravity per unit area, good flatness, and stable physical properties.

4. Our products are resistant to acids, alkalis, oils, and high temperatures, with an elegant and aesthetic color range, and power frequency withstand voltage meets national standards.

Performance of Our Insulating Rubber Mats

? No more than 5 bubbles per square meter with a diameter of 1cm2, distance between any two bubbles not less than 40mm, no cracks.

? Elongation at break ≥250%, no deformation.

? Heat aging in air at 70°C for 72 hours.

? Water absorption ≤1.5%.

? Power frequency withstand voltage RMS >15KV, no breakdown for 3 seconds.

? Smooth appearance, no unevenness, good elasticity.