Flood Barrier/Aluminum Alloy Flood Control Plate/Flood Control PlateIntroduction:

1. The patented product developed by Hebei Wuxing Power Equipment Co., Ltd.—substation/garage flood barrier, aluminum alloy flood control plate generally has a height specification of 50cm-80cm, with the length customized according to the actual width and height on site.

2. Wuxing subway flood barrier, garage flood barrier, aluminum alloy flood control plate material: The product is entirely made of high-strength aluminum alloy or aluminum alloy plate, offering high visibility and practicality! The reflective strip attached to the top is professionally made of engineering-grade reflective film, with the reflective film and backing paper being sturdy and durable.

3. Wuxing subway flood barrier, garage flood barrier, aluminum alloy flood control plate structure: The product consists of a central barrier plate, clamping grooves on both sides, and 4 expansion nails.

4. Detailed specifications of Wuxing subway flood barrier and garage flood barrier: The height of the aluminum alloy flood control plate clamping groove is consistent with the flood barrier plate, generally 500mm, and can be customized to 400mm, 450mm, or 600mm according to customer requirements!! The thickness of the central barrier plate is about 40mm, and the length of the aluminum alloy flood control plate is determined by the specific width of the door used! The thickness of the clamping groove is about 40mm, and the width is 30mm. Each Wuxing subway flood barrier and garage flood barrier is equipped with 4 expansion nails required for installation.

Flood Barrier/Aluminum Alloy Flood Control Plate/Flood Control PlateInstallation Method

Flood BarrierInstallation Steps

Step One You only need to measure the distance between the two walls where you plan to install the aluminum alloy flood control plate as accurately as possible. For the barrier height, our standard height is 50cm, but we can customize it according to your desired height, so you don’t need to worry about the height.

Step Two is to fix the clamping groove. When we ship the product, the clamping groove comes with four expansion nails and pre-drilled holes. You just need to drill four holes in the wall according to the pre-drilled holes, then install the four expansion nails, and the clamping groove will be fixed.

Step Three You only need to slide the main plate into the clamping groove. It can be removed when not in use, making it very convenient. Moreover, the clamping groove installed on the door does not affect the door’s opening and closing. With these very simple steps, the aluminum alloy flood control plate is installed.